• Media conversion between 10/100/1000BASE-T and 100BASE-FX/1000BASE-SX/LX
• TP Port supports 802.3af/at/bt PoE 48V-54V DC in-line-power
• TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X
• Fiber media allows
  
  • Multi-mode fiber using LC connector
  • Single-mode fiber using LC connector
• 100BASE-FX/1000BASE-SX/LX: 50/125μm/62.5/125μm multi-mode fiber cable or 9/125μm single-mode cable provides a distance depending on SFP module
• 1000BASE-T: 4-pair Cat. 5/5e/6 UTP cable, up to 100 meters 

Power over Ethernet:

• Compatible with IEEE 802.3bt Power over Ethernet plus plus end-span + mid-span PSE
• Compatible with IEEE 802.3at Power over Ethernet plus end-span/mid-span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet 

Standard:

• Complies with IEEE 802.3 10BASE-T
• Complies with IEEE 802.3u 100BASE-TX/100BASE-FX
• Complies with IEEE 802.3ab 1000BASE-T
• Complies with IEEE 802.3z 1000BASE-SX/LX
• IEEE 802.3x full-duplex and half-duplex back pressure flow control to eliminate packet loss
• IEEE 802.3af Power over Ethernet
• IEEE 802.3at Power over Ethernet Plus
• IEEE 802.3bt 4-pair Power over Ethernet Plus Plus (Type 3)
• IEEE 802.3bt 4-pair Power over Ethernet Plus Plus (Type 4) 

Layer 2 Features:

• Store-and-Forward mechanism
• Non-blocking full wire-speed forwarding rate
• IEEE 802.1Q Tag VLAN transparent, multicast pass through
• 9K jumbo frame 
• IEEE 802.3x full-duplex and half-duplex back pressure flow control to eliminate the loss of packets 

Mechanical:

• DIP switch for LFP function (Disable/Enable) setting
• LED indicators for easy network diagnostics
• Wall mounting or DIN-rail installation 
• Compact in size, easy installation
• Two power input designs (IEEE 802.3af/at/bt 48V~54V DC in-line power or  optional 5V DC input)
• Compact size for working with PLANET MC family media chassis (MC-700/MC-1500/MC-1500R/MC-1500R48)

Gigabit Networking with Energy Savings:'
In line with the energy-saving trend worldwide, PLANET has delivered a new-generation Gigabit Networking PoE PD Media Converter, GT-805A-PD. The GT-805A-PD incorporates the following advanced concepts:

• IEEE 802.3af/at/bt 48V~54V DC in-line power input
• Easy to install and use
• Compact-sized design
• Simple troubleshooting

PLANET GT-805A-PD is an 802.3at PoE+ PD 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter equipped with a convenient and cost-effective 802.3af/at/bt PoE power injection solution. It is quite different from the earlier version of PLANET media converter family that needs to obtain power from DC power adapter; it can power on via various IEEE 802.3at/bt PoE PSE equipment.  Two Kinds of Power Input Designs for Flexible Installation:
The GT-805A-PD features two kinds of power input system designs (IEEE 802.3af/at/bt 48V~54V DC in-line power and optional 5V DC input) incorporated into customer’s network to enhance system reliability and uptime. However, that has to depend on the kind of  Ethernet environment that is needed, be it the GT-805A-PD operated as a PoE PD media converter or standard Gigabit media converter with optional 5V DC input.

• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X function • 1 100Base-FX SC interface, providing long distance up to 2km on IFT-802T • 1 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15 • 1 Mini-GBIC slot, providing multi choice of SFP modules on IFT-805AT   Industrial Conformance • 12V to 48V DC, redundant power with polarity reverse protect function • -40 to 75 degrees C operating temperature • IP30 metal case • Relay alarm for port breakdown • Supports 6KV DC Ethernet ESD protection • Supports 6KV DC EFT protection for power line • Free Fall, Shock and Vibration Stability • DIN-rail and wall-mountable hardware design   Layer 2 Features • Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard • Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port • Store-and-Forward Switching Architecture • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Supports packet size of up to 1522bytes • CSMA/CD Protocol • Automatic source address learning and aging   Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment.   Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.   Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.   

• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X function • 1 100Base-FX SC interface, providing long distance up to 2km on IFT-802T • 1 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15 • 1 Mini-GBIC slot, providing multi choice of SFP modules on IFT-805AT   Industrial Conformance • 12V to 48V DC, redundant power with polarity reverse protect function • -40 to 75 degrees C operating temperature • IP30 metal case • Relay alarm for port breakdown • Supports 6KV DC Ethernet ESD protection • Supports 6KV DC EFT protection for power line • Free Fall, Shock and Vibration Stability • DIN-rail and wall-mountable hardware design   Layer 2 Features • Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard • Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port • Store-and-Forward Switching Architecture • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Supports packet size of up to 1522bytes • CSMA/CD Protocol • Automatic source address learning and aging   Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment.   Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.   Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.   

• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X function • 1 100Base-FX SC interface, providing long distance up to 2km on IFT-802T • 1 100Base-FX SC interface, providing long distance for 15km on IFT-802TS15 • 1 Mini-GBIC slot, providing multi choice of SFP modules on IFT-805AT   Industrial Conformance • 12V to 48V DC, redundant power with polarity reverse protect function • -40 to 75 degrees C operating temperature • IP30 metal case • Relay alarm for port breakdown • Supports 6KV DC Ethernet ESD protection • Supports 6KV DC EFT protection for power line • Free Fall, Shock and Vibration Stability • DIN-rail and wall-mountable hardware design   Layer 2 Features • Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard • Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port • Store-and-Forward Switching Architecture • Features Store-and-Forward mode with wire-speed filtering and forwarding rates • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • Supports packet size of up to 1522bytes • CSMA/CD Protocol • Automatic source address learning and aging   Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment.   Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.   Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.   

• 1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
• 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured

Fiber Port Redundancy

• Link status auto-detect and redundant on dual ports with the same connector type
• Only Primary-Port is active at a time, the Backup-Port is blocked
• When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically
• Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port

Layer 2 Features

• Supports auto negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
• High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• 9K Jumbo Frame Size support
• Integrated address look-up engine, support 1K absolute MAC addresses
• Automatic address learning and address aging

Industrial Case / Installation

• Slim IP30 metal case protection
• DIN rail and wall mount design
• Redundant Power Design

- 12 to 48V DC, redundant power with polarity reverse protect function - AC 24V power adapter acceptable

• Supports EFT protection 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

  Flexible, Reliable and Industrial-grade Network Distance Extension Solution PLANET IGT-1205AT is an Industrial Gigabit Media Converter providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It is equipped with one 10/100/1000Base-T RJ-45 copper and two 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGT-1205AT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from –40 to 75 degrees C.   Fiber-Optic Link Capability Enables Extension of Network Deployment The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optic uplink capability guarantees the throughput to all nodes hooked into the network and the Gigabit Ethernet distance can be extended from 550 meters (Multi-mode fiber cable) up to 10/20/30/40/50/70/120 kilometers (Single-mode fiber cable), and also the Fast Ethernet distance can be extended from 2km (Multi-mode fiber cable) up to 20/40/60 kilometers (Single-mode fiber cable). They are well suited for applications within the factory data centers and distributions.    Adjustable 3-Port Switch Mode or 2 Fiber Redundant Mode Via the built-in DIP switch, the two SFP fiber interfaces of the IGT-1205AT can be configured as Ethernet switch mode or Fiber Redundant mode. With the Ethernet switch mode, it can operate in Store-and-Forward mechanism with high performance; with the 2-port Fiber redundant mode, it provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant mode supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair.    Environmentally Hardened Design The IGT-1205AT is equipped with the slim-type IP30 metal case for easy deployment in heavy Industrial demanding environments. With IP30 industrial case protection, the IGT-1205AT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGT-1205AT can be placed in almost any difficult environment. The IGT-1205AT also allows either DIN rail or wall mounting for efficient use of cabinet space.   Convenient and Reliable Power System To enhance the operation reliability and flexibility, the IGT-1205AT is equipped with two DC power input connectors for redundant power supply installation. It also possesses an integrated power supply source with wide-ranging voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs.

• 1-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function
• 1 SFP interface, 100/1000BASE-X dual mode (auto detection)

  Layer 2 Features

• IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet standard compliant
• Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• 9K jumbo frame size support
• LFP function support
• Automatic address learning and address aging

  Industrial Case / Installation

• Slim-type IP30 metal case
• DIN rail and wall-mount design
• Redundant power design

- 12 to 48V DC, redundant power with polarity reverse protect function - AC 24V power adapter acceptable

• Supports EFT protection for 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

  Flexible, Reliable and Industrial-grade Network Distance Extension Solution PLANET IGT-805AT is an Industrial Gigabit Media Converter providing non-blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment. It is equipped with one 10/100/1000BASE-T RJ45 copper and one 100/1000BASE-X SFP fiber optic interface delivered in an IP30 rugged strong case with redundant power system. The IGT-805AT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C. With 9K jumbo frame feature support, the IGT-805AT can handle extremely large amounts of data transmission in a secure topology linking to a backbone or high-power servers.    Fiber-Optic Link Capability Enables Extension of Network Deployment The SFP slot of the IGT-805AT is compatible with 100BASE-FX and 1000BASE-SX / LX / WDM through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optic uplink capability guarantees the throughput to all nodes hooked into the network and the Gigabit Ethernet distance can be extended from 550 meters (multi-mode fiber cable) to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber cable), and also the Fast Ethernet distance can be extended from 2km (multi-mode fiber cable) to 20/40/60 kilometers (single-mode fiber cable). It is the ideal product for applications within the factory data centers and distributions.    Enhanced Smart Management Features The IGT-805AT provides auto MDI/MDI-X on its TP port and built-in Link Fault Pass-through function (LFP). The LFP function includes Link Loss Carry Forward (LLCF) and Link Loss Return (LLR), both of which can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber port will disconnect the link of transmission. LLR means when a device connected to the converter and the fiber line loses the link, the converter’s fiber port will disconnect the link of transmission. Therefore, the IGT-805AT greatly supports the administrators to manage the network efficiently.    Environmentally Hardened Design The IGT-805AT is equipped with the slim-type IP30 metal case for easy deployment in heavy Industrial demanding environments. With IP30 industrial case protection, the IGT-805AT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGT-805AT can be placed in almost any difficult environment. The IGT-805AT also allows either DIN rail or wall mounting for efficient use of cabinet space.    Convenient and Reliable Power System To enhance the operation reliability and flexibility, the IGT-805AT is equipped with two DC power input connectors for redundant power supply installation. It also possesses an integrated power supply source with wide-ranging voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs.

• 1-port 10/100/1000BASE-T RJ45
• One SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver dual mode

  Layer 2 Features:

• Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex mode on RJ45 port
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

  Hardware:

• DIP switch: LFP (Link Fault Passthrough) mode selection

  Industrial Case and Installation:

• IP30 metal case
• DIN-rail and wall-mount designs
• 48V~56V DC  power with reverse polarity protection
• Connective removable terminal block
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Free fall, shock-proof and vibration-proof for industries

PLANET IGT-900-1T1S, a fully-managed Gigabit Media Converter for harsh environments, features one 10/100/1000Mbps copper port, one 100/1000/2500X SFP port and redundant power system in an IP30 rugged but compact-sized case. The IGT-900-1T1S can be installed in any difficult environment as it can operate stably under the temperature range from -40 to 75 degrees C. With such a slim enclosure, it does not need a big space to install. The switch features user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static routing capability. It allows either DIN-rail or wall mounting for efficient use of cabinet space. With SFP fiber slot, it can be flexibly applied to extend the connection distance. 

• 1x 10/100/1000BASE-T RJ45 with IEEE 802.3af /802.3at PoE+ Injector
• 1x 1000BASE-SX/LX SC Fiber interface (IGTP-802T/IGTP-802TS)
• 1x SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver dual mode (IGTP-805AT) 

Power over Ethernet:

• Complies with IEEE 802.3at/af PoE Plus end-span PSE
• 1 IEEE 802.3at/af device powered
• Supports PoE Power up to 30.8 watts for PoE port
• Provides DC 52V power over RJ45 Ethernet cable to PD with Ethernet port
• Auto-detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation
• Remote power feeding up to 100m
• IEEE 802.3at/af splitter devices compatible 

Layer 2 Features:

• Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex mode on RJ45 port
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) 

Hardware:

• LED Indicators
  
  • System: Power 1, Power 2 and Fault LED      
  • Fiber port: LNK/ACT
  • 10/100/1000Base-T port: LNK/ACT, 1000, PoE-in-use
• DIP switch: LFP (Link Fault Passthrough) mode selection 

Industrial Case and Installation:

• IP30 metal case 
• DIN-rail or wall-mount design
• 12 ~ 48V DC/24V AC redundant power with polarity reverse protect function and connective removable terminal block for master and slave power
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature

PLANET IGTP-80xT Industrial Gigabit Media Converter combines Ethernet media conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3at Power over Ethernet Plus (PoE+) injector to deliver both up to 30 watts of power output and high data transmission speed to PDs (powered devices) installed in a remote area where sufficient and reliable power input is required. Its 1000BASE-X fiber optic uplink port provides long distance, high speed and stable data transmission to a remote core network. The special and convenient power system of the IGTP-80xT supports 12~48V DC power input or 24V AC power input for power redundancy and operational flexibility.  Being able to operate under the temperature ranging from -40 to 75 degrees C and with an IP30 rugged case, the IGTP-80xT can be placed in almost any difficult environment. Fiber-optic Link Capability Extends the Range of Network Deployment:
The maximum distance between a PoE PSE (power sourcing equipment) and PD via Ethernet cable is 100 meters. To extend the PoE deployment range, the IGTP-80xT is integrated with fiber interface for farther distance applications.  The IGTP-80xT’s fiber connector type is as follows:

• IGTP-802T: Fiber SC connector supporting 1000BASE-SX multi-mode and transmission distance up to 550m.
• IGTP-802TS: Fiber SC connector supporting 1000BASE-LX single-mode and transmission distance up to 10km.
• IGTP-805AT: SFP slot supporting 100BASE-FX/1000BASE-X multi/single mode SFP module and transmission distance up to 120km (Varying on SFP module).

With the long fiber distance support, the IGTP-80xT still sustains the transmission performance as high as 1000Mbps. It works in the high-performance Store and Forward mechanism, and also can prevent packet loss with IEEE 802.3x flow control and the LFP (Link Fault Passthrough) function in the DIP switch design. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitor the network power usage. Plug and Play High Power Sourcing Solution:
Complying with the IEEE 802.3at Power over Ethernet Plus technology, the IGTP-80xT provides up to 30 watts of PoE output power, doubling that of the earlier 802.3af. It is also backward compatible with 802.3af PoE standards to allow users to flexibly deploy standard and high powered devices simultaneously with no need of software configuration. With data and Power over Ethernet from one unit, the IGTP-80xT can reduce cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. Convenient and Reliable Power System:
To facilitate the 802.3at power PoE+ usage with the commonly-used 12~48V DC power input or 24V AC power input for transportation and industrial-level applications, the IGTP-80xT adopts the 12~48V DC to 52V power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs.  Environmentally Hardened Design for Industrial PoE Networks:
The IGTP-80xT is specifically designed with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments like plant floors or curbside traffic control cabinets. The IGTP-80xT is packaged in a compact, IP30 rugged case that allows either DIN-rail or wall mounting to have the efficient use of cabinet space. With IP30 rugged case protection and PoE design, the IGTP-80xT is ideal for service providers, campuses and public areas to deploy PoE wireless access points, IP cameras or IP phones in any places easily and efficiently with cost-effectiveness. It can also operate in wide temperature range of -40 to 75 degrees C, so it can be placed in almost any location.

• 1-port 10/100/1000BASE-T RJ45 with IEEE 802.3at PoE+ injector function
• One SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver dual mode

  Power over Ethernet:

• Complies with IEEE 802.3at PoE Plus end-span PSE
• 1 IEEE 802.3at/af device powered
• Supports PoE Power up to 36 watts for PoE port
• Provides DC 48~56V power over RJ45 Ethernet cable to PD with Ethernet port
• Auto detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation
• Remote power feeding up to 100m
• IEEE 802.3at/af PoE splitter devices compatible

  Layer 2 Features:

• Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex mode on RJ45 port
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

  Hardware:

• DIP switch: LFP (Link Fault Passthrough) mode selection

  Industrial Case and Installation:

• IP30 metal case
• DIN-rail and wall-mount designs
• 48V~56V DC  power with reverse polarity protection
• Connective removable terminal block
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Free fall, shock-proof and vibration-proof for industries

• 1x 10/100/1000BASE-T with IEEE 802.3at PoE+ Gigabit RJ45 port
  
  • Data + Power output
• 1x 1000BASE-X SFP  interface 
  
  • Data input
• 1x 2-pin terminal block for power input. (Power Range: 24 ~ 56V DC) 

Power over Ethernet:

• 1-port data + power output
  
  • Complies with IEEE 802.3at Power over Ethernet plus PSE
  • Compatible with IEEE 802.3at/802.3af powered devices 
  • Supports total PoE budget up to 30 watts for PoE output port
  • Provides DC 55V power over RJ45 Ethernet cable to device with Ethernet port 
  • Auto detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation
  • Remote power feeding up to 100m
  • Auto detects powered device (PD) 

Industrial Case and Installation:

• IP67-rated and IK-10 rated aluminum case 
• Wall-mount design
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
• Plug and Play installation

Designed to Operate under Wide Temperature Range:
PLANET IGTP-825AT is the industrial-grade Gigabit PoE+ Media Converter, featuring one 1000BASE-X SFP fiber port and one 10/100/1000BASE-T 802.3at PoE+ copper port in an IP67 rugged but compact-size case. Being able to operate under the temperature ranging from -40 to 75 degrees C, the IGTP-825AT provides reliable, stable and continuous long-range data transmission and can be installed in any harsh environment without taking space into consideration.  Backward Compatibility Saves Deployment Costs:
The  IGTP-825AT can deliver up to 30-watt 55V DC power over Cat.5/5e/6 Ethernet cables, doubling that of the earlier 802.3af. It is also backward compatible with 802.3af PoE standards to allow users to flexibly deploy standard and high powered devices simultaneously with no need for software configuration. With data and Power over Ethernet from one unit, the IGTP-825AT can reduce cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. Fiber-optic Link Capability Extends Network Deployment Distance:
The maximum distance between a PoE PSE (power sourcing equipment) and a PD via Ethernet UTP cable is 100 meters. To flexibly extend the PoE deployment range, the IGTP-825AT’s SFP slot, supporting a 1000BASE-X SFP module, can extend the distance from 550m to 120km.  The SFP module (transceiver) is hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the Industrial 802.3at PoE+ Media Converter. Weather-proof RJ45 Ethernet Connector and Shielded Plug:
The IGTP-825AT is ideal for installing an extended range of outdoor PoE devices such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms and many more. The IGTP-825AT is equipped with 3 waterproof cable glands for direct-attach applications. Assembled with a waterproof cable gland, it can make the general connector weather-proof and provides a tight and strong connection. Moreover, it comes with the industrial protection rating of IP67 capable of withstanding humidity, dirt, dust, shock, vibrations, heat and cold.  Environmentally-hardened Design:
With an industrial-level IP67-rated aluminum case, the IGTP-825AT provides a high level of immunity against electromagnetic interference and wide-ranging temperature capability, and can protect itself from dust and water ingress.  All these features ensure the highest level of reliability for mission-critical applications in any difficult environment.  Fluctuation Protection:
The IGTP-825AT provides ±8KV DC for Ethernet ESD protection and ±6KV surge immunity to improve product stability and thus protects networks from power fluctuation.

• 1x 10/100/1000BASE-T RJ45 with IEEE 802.3bt PoE Injector function
• 2x SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver dual mode 

Power over Ethernet:

• Complies with IEEE 802.3af/at/bt PoE Plus end-span PSE
• 1 IEEE 802.3af/at/bt device powered
• Supports PoE Power up to 95 watts for PoE port
• Provides DC 54V power over RJ45 Ethernet cable to PD with Ethernet port
• Auto-detects IEEE 802.3bt equipment and protects devices from being damaged by incorrect installation
• Remote power feeding up to 100m
• IEEE 802.3af/at/bt splitter devices compatible 

Layer 2 Features:

• Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode on RJ45 port
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) 

Hardware:

• LED Indicators
  
  • System: Power 1, Power 2, Fault and PoE usage 
  • Fiber port: LNK/ACT
  • 10/100/1000BASE-T port: LNK/ACT, PoE-in-use
• DIP switch: Standard/Legacy mode selection 

Industrial Case and Installation:

• IP30 metal case 
• DIN-rail and wall-mount designs
• 12 ~ 56V DC redundant power with reverse polarity protection and connective removable terminal block for master and slave power
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature 

PLANET IGUP-1205AT Industrial Gigabit Media Converter combines Ethernet media conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3bt Power over Ethernet Plus Plus (PoE++) injector function to deliver up to 95 watts of power output and high data transmission speed to PDs (powered devices) installed in a remote area where sufficient and reliable power input is required. Its 1000BASE-X fiber optic uplink port provides long distance, high speed and stable data transmission to a remote core network. The special and convenient power system of the IGUP-1205AT supports dual 12~56V DC power inputs for power redundancy and operational flexibility.  Being able to operate under the temperature ranging from -40 to 75 degrees C and with an IP30 rugged case, the IGUP-1205AT can be placed in almost any difficult environment. Fiber-optic Link Capability Extends the Range of Network Deployment:
The maximum distance between a PoE PSE (power sourcing equipment) and PD via Ethernet cable is 100 meters. To extend the PoE deployment range, the IGUP-1205AT is integrated with fiber interface for farther distance applications. The IGUP-1205AT’s fiber connector type is as follows: Two SFP slots supporting 100BASE-FX/1000BASE-X multi/single mode SFP module and transmission distance up to 120km (Varying on SFP module)  With the long fiber distance support, the IGUP-1205AT still sustains the transmission performance as high as 1000Mbps. It works in the high-performance Store and Forward mechanism, and also can prevent packet loss with IEEE 802.3x flow control. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitor the network power usage.  Plug and Play High Power Sourcing Solution:
Complying with the IEEE 802.3bt Power over Ethernet Plus technology, the IGUP-1205AT provides up to 95 watts of PoE output power, tripling that of the earlier 802.3at. Through, the Legacy function in the DIP switch design, it is also backward compatible with 802.3af/at PoE standards to allow users to flexibly deploy standard and high powered devices simultaneously with no need of software configuration. With data and Power over Ethernet from one unit, the IGUP-1205AT can reduce cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.  Convenient and Reliable Power System:
To facilitate the 802.3bt power PoE++ usage with the commonly-used 12~48V DC power input for transportation and industrial-level applications, the IGUP-1205AT adopts the 12~48V DC to 56V power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs. Environmentally Hardened Design for Industrial PoE Networks:
The IGUP-1205AT is specifically designed with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments like plant floors or curbside traffic control cabinets. The IGUP-1205AT is packaged in a compact, IP30 rugged case that allows either DIN-rail or wall mounting to have the efficient use of cabinet space. With IP30 rugged case protection and PoE design, the IGUP-1205AT is ideal for service providers, campuses and public areas to deploy PoE wireless access points, IP cameras or IP phones in any places easily and efficiently with cost-effectiveness. It can also operate in wide temperature range of -40 to 75 degrees C, so it can be placed in almost any location. 

• 2x 10/100/1000BASE-T RJ45 with IEEE 802.3bt PoE Injector function
• 2x SFP slots, supporting 1000BASE-X and 100BASE-FX transceiver dual mode 

Power over Ethernet:

• Complies with IEEE 802.3af/at/bt PoE Plus end-span PSE
• 1 IEEE 802.3af/at/bt device powered
• Supports PoE Power up to 95 watts for each PoE port
• Provides DC 54V power over RJ45 Ethernet cable to PD with Ethernet port
• Auto-detects IEEE 802.3bt equipment and protects devices from being damaged by incorrect installation
• Remote power feeding up to 100m
• IEEE 802.3af/at/bt splitter devices compatible 

Layer 2 Features:

• Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode on RJ45 port
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) 

Hardware:

• LED Indicators
  
  • System: Power 1, Power 2, Fault and PoE usage 
  • Fiber port: LNK/ACT
  • 10/100/1000BASE-T port: LNK/ACT, PoE-in-use
• DIP switch: Standard/Legacy mode selection 

Industrial Case and Installation:

• IP30 metal case 
• DIN-rail and wall-mount designs
• 12 ~ 56V DC redundant power with reverse polarity protection and connective removable terminal block for master and slave power
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature 

PLANET IGUP-2205AT Industrial Gigabit Media Converter combines Ethernet media conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3bt Power over Ethernet Plus Plus (PoE++) injector function to deliver both ports up to 190 watts of power output and high data transmission speed to PDs (powered devices) installed in a remote area where sufficient and reliable power input is required. Its 1000BASE-X fiber optic uplink port provides long distance, high speed and stable data transmission to a remote core network. The special and convenient power system of the IGUP-2205AT supports dual 12~56V DC power inputs for power redundancy and operational flexibility.  Being able to operate under the temperature ranging from -40 to 75 degrees C and with an IP30 rugged case, the IGUP-2205AT can be placed in almost any difficult environment. Fiber-optic Link Capability Extends the Range of Network Deployment:
The maximum distance between a PoE PSE (power sourcing equipment) and PD via Ethernet cable is 100 meters. To extend the PoE deployment range, the IGUP-2205AT is integrated with fiber interface for farther distance applications. The IGUP-2205AT’s fiber connector type is as follows:  Two SFP slots supporting 100BASE-FX/1000BASE-X multi/single mode SFP module and transmission distance up to 120km (Varying on SFP module) With the long fiber distance support, the IGUP-2205AT still sustains the transmission performance as high as 1000Mbps. It works in the high-performance Store and Forward mechanism, and also can prevent packet loss with IEEE 802.3x flow control. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitor the network power usage.  Plug and Play High Power Sourcing Solution:
Complying with the IEEE 802.3bt Power over Ethernet Plus technology, the IGUP-2205AT provides up to 95 watts of PoE output power, tripling that of the earlier 802.3at. Through, the Legacy function in the DIP switch design, it is also backward compatible with 802.3af/at PoE standards to allow users to flexibly deploy standard and high powered devices simultaneously with no need of software configuration. With data and Power over Ethernet from one unit, the IGUP-2205AT can reduce cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.  Convenient and Reliable Power System:
To facilitate the 802.3bt power PoE++ usage with the commonly-used 12~48V DC power input for transportation and industrial-level applications, the IGUP-2205AT adopts the 12~48V DC to 56V power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs. Environmentally Hardened Design for Industrial PoE Networks:
The IGUP-2205AT is specifically designed with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments like plant floors or curbside traffic control cabinets. The IGUP-2205AT is packaged in a compact, IP30 rugged case that allows either DIN-rail or wall mounting to have the efficient use of cabinet space. With IP30 rugged case protection and PoE design, the IGUP-2205AT is ideal for service providers, campuses and public areas to deploy PoE wireless access points, IP cameras or IP phones in any places easily and efficiently with cost-effectiveness. It can also operate in wide temperature range of -40 to 75 degrees C, so it can be placed in almost any location.